When your old brakes start dragging or wearing unevenly, these Lippert 12" x 2" electric brake assemblies make the fix simple. Each kit comes with one left-hand and one right-hand assembly that bolt right up to a 5-bolt flange and fit 14-1/2", 15", 16", and 16-1/2" wheels. They’re built for 5,200-lb, 6,000-lb, and 7,000-lb axles and are ready to pair with Lippert ABS hub-and-drum setups. With a direct fit for ABS hardware and a plug-in connection to your standard brake controller, you get smoother braking without extra wiring or programming.
Crawling under your trailer to tighten up brakes gets old fast. These self-adjusting assemblies take care of that for you. After an initial setup, the fine-tooth adjustment gear automatically maintains the correct shoe spacing as the brakes wear in, so you don’t lose stopping power over time. That means consistent braking effort mile after mile and no more guesswork with manual adjusters.
Each shoe is lined with an automotive-grade friction material that’s fully bonded—never riveted—for longer life and stronger braking torque. The lining is custom-molded with tapered edges and circular grinding to help prevent cracking or crumbling that can cause lockup. It’s also SAE-N certified and meets environmental standards in California and Washington, giving you high-performance braking that’s both durable and compliant across North America.
Moisture, salt, and dirt can shorten brake life in a hurry. These assemblies are built to handle it with an E-coated backing plate that resists wear and corrosion. The included adjuster plugs keep dirt out of the mechanism, helping the shoes stay clean and responsive. Tested by QAI and CSA for braking performance under real-world conditions, they deliver safe, predictable stopping power every time you tow.
If you like doing your own maintenance, these assemblies are made for easy installation. Each one mounts directly to your existing flange using standard hardware (sold separately) and connects just like traditional electric brakes—one wire to power, one to ground. You’ll carry over your existing ABS sensor into the pre-drilled mounting holes on the backing plate, keeping everything plug-and-play with your Lippert ABS hub system.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Poorly packaged and damaged in shipment.
Brakes arrived damaged. Poor packaging on etrailer’s part
Shipped fast installed easy!
Perfect replacement. Easy fitment and a djustment
One little hiccup.. one of the assemblies was not setup correctly. Other than that everything went together great
Tyler is a pleasure to talk with. Got me the correct parts for my fifth wheel camper and shipping was fast.
I called E Trailer you ensure that I ordered the right part. Josh was awesome! He made sure that the parts fit my RV and indicated when I should receive the order. He was 100% correct on both counts. The parts fit perfectly making the overall experience superb.
Thanks again Josh, your help was priceless.
Exactly what I ordered but one assembly was tweaked pretty good so I’m going to have to take springs off brakes and reinstall adjuster and line everything back up
Do you have a question about this Trailer Brake?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.